top of page

Multispectral vs standard drone cameras: what's the difference?

2 days ago
7 min read

The short answer: A standard drone camera records red, green and blue light, the same three colours your eye sees, so it shows you what a paddock looks like. A multispectral drone camera also records red edge and near-infrared light, which healthy leaves reflect strongly and stressed leaves don't. That extra data lets software build NDVI and NDRE maps that show crop stress well before you can see it from the ute, and turns those maps into variable-rate prescriptions for your spreader or spray drone.

Every drone sold today has a camera good enough to photograph a paddock. Very few of them can tell you which part of that paddock is short of nitrogen. The gap between those two things is the difference between a standard camera and a multispectral one, and it is worth understanding before you spend $7,200 ex GST on a sensor you may or may not need.


What a standard drone camera records

A standard camera is an RGB camera. It has one sensor with a filter grid that separates light into red, green and blue, and the image it produces matches what you would see standing in the paddock. On a drone like the Matrice 4 Enterprise that sensor is 20 megapixels, which is plenty of detail to count emerged plants, spot a blocked nozzle run, check fence lines or build a photogrammetry map with centimetre-level accuracy.


What it cannot do is measure plant health in any repeatable way. A yellowing patch shows up once it is yellow. By then the plant has been stressed for a fortnight or more, and if the cause was a nutrient deficiency or early disease, the yield in that patch is already affected.


What a multispectral drone camera records

A multispectral camera records several narrow bands of light through separate lenses, usually green, red, red edge and near-infrared. The last two are outside what the human eye can see, and they are where the useful information lives. A healthy leaf full of chlorophyll absorbs red light and reflects a large amount of near-infrared. A stressed leaf absorbs less red and reflects less near-infrared, and that change starts days before the leaf changes colour.


Software compares the bands pixel by pixel to produce vegetation indices. NDVI, the normalised difference vegetation index, compares red and near-infrared and is the standard measure of overall vigour. NDRE swaps red for the red edge band and reads through a dense canopy better, which makes it the more useful index later in the season when NDVI saturates. Each index gives you a colour-coded map where every pixel carries a number, and the numbers are what you act on.


There is one more piece most people miss. Multispectral drones carry a sunlight sensor on top of the aircraft that records the light hitting the paddock at the moment each image is taken. Without it, a map flown under cloud and a map flown in full sun are not comparable. With it, you can fly the same paddock every fortnight and trust that the change on the map is the crop and not the weather.


Where the difference shows up in your paddock

The practical value of a multispectral drone is time. Nitrogen deficiency, waterlogging, early fungal pressure and insect damage all reduce chlorophyll before they change the look of the plant, and an NDVI or NDRE map picks that up while there is still a window to do something about it. GRDC-invested research at the University of Western Australia is built on exactly this, using the difference in spectral response between healthy and stressed plants to pick up frost, salt and disease stress before visible symptoms appear, which the researchers note often only show at the middle or late stages. A Queensland Department of Agriculture trial in green beans found the lower-NDVI areas of a paddock yielded 20 per cent less, and those areas made up about 27 per cent of the field.


The second payoff is the prescription map. Once you have a zoned map of the paddock, the software exports a variable-rate file that a spreader or a spray drone reads directly. You put the urea where the crop is short and hold it back where it isn't. A DJI Agras T50 or T70P flying a multispectral prescription will apply a different rate to each zone without the pilot touching the controls.


  • In-crop nitrogen. Zone the paddock by NDRE and feed the hungry zones, which cuts the total urea bill on variable country

  • Disease scouting. Flag the low-NDVI patches in a cereal or cotton crop and walk to those first, which saves zig-zagging the whole block

  • Irrigation and drainage. A stressed strip that follows a contour or a pivot track usually means water, and the map shows the shape of it

  • Emergence and establishment. Count plants from the RGB camera on the same flight and compare paddocks or seed lots

  • Pasture and feed budgeting. Track biomass across a season to decide which paddocks to graze or lock up


For a lot of our customers the first prescription map is what pays for the drone. The savings come from putting less product on the parts of the paddock that don't need it, and that cost is visible on the next fertiliser invoice.


What the DJI Mavic 3 Multispectral brings to the job

The DJI Mavic 3 Multispectral is the DJI drone multispectral buyers in Australia land on most often, and it is what we stock. It puts a 20 megapixel RGB camera alongside four 5 megapixel multispectral sensors covering green, red, red edge and near-infrared, with the sunlight sensor built into the top of the airframe. The RTK module gives you centimetre-level positioning so maps from different dates line up, and a flight of around 43 minutes covers a large paddock in one battery (DJI quotes up to 200 hectares per flight, which depends on altitude and wind).

It folds into a backpack, launches from a ute bonnet and is sold at $7,200 ex GST, which is the main reason it has replaced bolt-on multispectral sensors for most farm use. On the software side, DJI Terra and DJI SmartFarm handle the stitching, index maps and prescription files, and third-party packages such as Pix4Dfields and Agisoft Metashape also read the data if you already run one. The prescription files export to common spreader controllers and straight to the Agras range.


Which multispectral camera is best for a drone?

Anyone searching for the best multispectral camera for drone work usually means one of two things, a sensor to bolt onto an aircraft they already own, or a drone with the camera built in. For farmers and agronomists, our view is that the integrated option wins almost every time. The lenses, the sunlight sensor and the RTK are calibrated to each other at the factory, the processing workflow is built for it, and the whole kit costs less than most standalone multispectral sensors did five years ago. The Mavic 3 Multispectral is the integrated option DJI makes, and it is what we recommend for crop work.


Where a standalone sensor still makes sense is research and specialist consulting. If you need ten or more narrow bands, thermal in the same pass, or a payload on a heavy aircraft like the Matrice 400 that can stay up for an hour, you are into hyperspectral and multi-sensor territory and the price goes up accordingly. Most farms never need to go there.


When a standard camera is all you need

If your main jobs are checking water points, finding stock, inspecting fences and sheds, filming for insurance or photographing a property for sale, a standard camera on a Matrice 4 Enterprise or a Matrice 4 Thermal does all of it and the thermal version adds night work on top. You don't need vegetation indices to count cattle.


The deciding question is whether a decision on your place depends on knowing the crop's condition before you can see it. If the answer is yes, and you are putting fertiliser or chemical on upwards of a couple of hundred hectares a year, the multispectral drone usually pays for itself inside a season. If the answer is no, buy the standard camera and spend the difference on batteries.


Frequently Asked Questions

Can a normal drone camera do NDVI?

Not reliably. Some software will produce a false-NDVI from an RGB image by using the blue channel as a stand-in for near-infrared, but it is measuring colour, not reflectance, has no sunlight calibration and cannot be compared between flights. For a one-off look it can be interesting. For a prescription map you need the near-infrared band, which means a multispectral sensor.

How much does a multispectral drone cost in Australia?

The DJI Mavic 3 Multispectral is $7,200 ex GST from Australian Agricultural Drones, which includes the RGB camera, the four multispectral sensors, the sunlight sensor and the RTK module on a single aircraft. Processing software such as DJI Terra, SmartFarm or a third-party package is licensed separately. Standalone multispectral sensors for larger aircraft start higher and need the aircraft on top.

What is the difference between NDVI and NDRE?

NDVI compares red and near-infrared light and is the general-purpose vigour index. NDRE swaps red for the red edge band, which penetrates a thick canopy better, so it keeps separating healthy from stressed plants late in the season when NDVI reads high everywhere. Early in the season use NDVI. Once the canopy closes, switch to NDRE.

Do I need a licence to fly a multispectral drone on my farm?

The Mavic 3 Multispectral weighs under 2 kg, so it falls into CASA's excluded category. On your own property, or for paid work under 2 kg once you have notified CASA, you need to register the drone and hold CASA's free operator accreditation, which is quicker than a full licence. Night flying or anything beyond visual line of sight needs a remote pilot licence and an operator's certificate. We can point you to training that covers it.


Not sure whether multispectral is worth it? Call 0448 158 563 or email info@ausagdrones.com.au and tell us what you grow and how many hectares. We will tell you which camera suits the job, and when a standard one will do.

Contact Us

Nambour, QLD, Australia

Tel: 0448 158 563

info@ausagdrones.com.au

Customer Service

Contact Us  |  Shipping

Terms & Conditions

We Accept

MasterCard Logo
Visa Logo
Paypal Logo
  • Facebook
  • Instagram

© 2025 by Australian Agricultural Drones Ply Ltd

All prices listed are exclusive of GST and are intended for business customers only. GST will be added at checkout.

* Terms and Conditions apply. Check our website for more info.

know-your-drone-safety-advocate.avif
Australian Veteran Owned and Operated Business

Our Locations

Sunshine Coast, QLD

Innisfail, QLD

Melbourne, VIC

bottom of page